How does Version V 2.70.0 differ from the previous version?

•     User interface in Russian language available
•     LogFiles can now be downloaded partially
•     Various optimisations and bugfixes

How to install the update:

• Download the file "setup.exe" to your PC.
• If the Hydras 3 LT application software is still running: quit the program.
• Start the file "setup.exe" -> the "InstallShield Wizard" opens.
• Follow the installation instructions on the screen. Please use the existing installation path of Hydras 3 LT! Change preset installation path if necessary!

Please note

• To preserve existing configurations, e.g. "workspaces", please check strictly the preset installation path during the update!
• Preset installation path: "C:\Program Files\OTT\Hydras3LT"; at prior installations: "C:\Program Files\Hydras3LT"!

FIRMWARE

V 1.01.2 (2023-01-25)

- Support of the OTT ecoLog 1000 with conductivity sensor.

- Further minor bug fixes

V 1.01.0 ... V 1.01.1

- OTT internal versions; not published

V 1.00.7 (2022-06-27)

- Support of FTPS added (PROT-C!)

- Add of sms transmission - values in text format (additional to binary)

- sms functionality now available for US as well (Verizon and AT&T)

- Database reset is not enforced anymore - only on user request

- Scaling modules for temperature measurement added

- Various bug fixes

V 1.00.6 (2020-11-18)

- Option "Active FTP" (Active Mode) added.

- Now also supports the previous ZRXP transmission format.

- Now supports "MQTT & MQTTS" transmissions.

- Diagnostic output for SMS transfers added.

- Further minor bug fixes and firmware optimizations.

V 1.00.5 (2020-08-10)

- Revised/increased possibilities for customizing CSV files for IP data transmission and for downloading data on site.

- SMS test transmission is now also possible without a configured SMS transmission.

- Bugfixes:

  ● handling of UUID (Universally Unique Identifier) for ZRXP and MIS format corrected

  ● NTP timestamp improved (date of the device was set into future)

  ● improved "timing" between data logger and pressure probe (potential error "ERR05")

  ● further minor corrections

V 1.00.4 (2020-02-13)

- Now available: additional measurement channel (M6) for calculation of more values ("processed value")

- Added: FTP-command managment. Special commands in a control file on an FTP server allow access to the OTT ecoLog 1000

- Stations and measuring channels can now be provided with a unique identifier (UUID).

V 1.00.2 ... V 1.00.3

OTT internal versions; not published

V 1.00.1 (2019-07-04)

- Initial version

---------------------------------------------------------------------------------

OPERATING SOFTWARE LinkComm

V 3.8.0 (2023-02-27)

- The order of the OTT ecoLog 1000 measurements can now be arranged as desired in the LinkComm software.

- Support of the OTT ecoLog 1000 with conductivity sensor.

- Includes OTT ecoLog 1000 firmware V 1.01.2.

- Further minor corrections

V 3.7.22 (2022-10-05)

- Load graph previously downloaded ecoLog 1000 data files

- Restore ability to save or share an image of the Data graph

- Fixed bug causing layout corruption of “TX Content” settings (Link family loggers)

- Fixed bug where Live Poll did not cease when dialog was closed

- Restore ability to use the trash can button to delete ecoLog measurement item (trash can button revealed by swiping left; only “extra” / user-added measurement items may be deleted)

- Restore ability of “Log Files…” button to open a dialog displaying recently downloaded log files

- Firmware included: Satlink3 v847r3493, XLink 100/500 v847r3493, X-Link v1.80, and ecoLog 1000 v1.00.7

V 3.7.20 (2022-06-27)

- Support of FTPS added (PROT-C!)

- Add of sms transmission - values in text format (additional to binary)

- sms functionality now available for US as well (Verizon and AT&T)

- Database reset is not enforced anymore - only on user request

- Scaling modules for temperature measurement added

- Various bug fixes

V 3.7.10 ... V 3.7.19

OTT internal versions; not published

V 3.7.9 (2021-04-28)

- Nomenclature in the "Modbus" settings section revised (term "server").

- Added warning when attempting to send a configuration to OTT ecoLog 1000 that does not have a station password enabled.

- Bugfix: Creating/changing OTT ecoLog 1000 password reworked again.

- Includes OTT ecoLog 1000 Firmware V 1.00.6.

V 3.7.8 (2021-04-14)

- Bugfixes:

  ● Menu "Options ...", "Language", selection "German" reworked.

  ● Creating/changing OTT ecoLog 1000 password reworked.

- Includes OTT ecoLog 1000 Firmware V 1.00.6.

V 3.7.7

- Updates to these versions only concern data collectors/transmitters from Sutron; not relevant for operating an OTT ecoLog 1000 or OTT internal versions; not published.

V 3.7.6 (2021-03-31)

- Added support for entering "Umlaut"-characters in OTT ecoLog 1000 paths.

- Added possibility to deactivate a configured IP transmission of OTT ecoLog 1000

- Extended the maximum length of allowable characters for OTT ecoLog 1000 Server Address and scripts paths to 100.

- Includes OTT ecoLog 1000 Firmware V 1.00.6.

V 3.7.5

- Updates to these versions only concern data collectors/transmitters from Sutron; not relevant for operating an OTT ecoLog 1000 or OTT internal versions; not published.

V 3.7.4 (2020-11-18)

- The resolution of the OTT ecoLog 1000 water temperature measurement is now optionally adjustable to two decimal places.

- Option of a second test transmission for sending current data on request.

- Now supports the previous ZRXP transmission format for OTT ecoLog 1000 transmissions.

- New server type "MQTT & MQTTS" for OTT ecoLog 1000 transmissions added.

- Option "Active FTP" (Active Mode) to the OTT ecoLog 1000 server settings added.

- Includes OTT ecoLog 1000 Firmware V 1.00.6.

- Other minor software optimizations and bug fixes.

V 3.7.0 ... 3.7.3

- Updates to these versions only concern data collectors/transmitters from Sutron; not relevant for operating an OTT ecoLog 1000 or OTT internal versions; not published.

V 3.6.9 (2020-08-10)

- Added support for exchanging setup information with OTT Hydras 3

- Enables the creation of an additional measuring channel: measurement of relative humidity ("Logger humidity") in the communication unit of the OTT ecoLog 1000

- Revised/increased possibilities to configure CSV files for IP data transmission and for downloading data on site; e.g. date and time format, separators, ...

- OTT ecoLog 1000 cell provider settings are now filterable by country and region

- OTT ecoLog 1000 cell provider database has been updated

- The OTT ecoLog 1000 system length can be changed (after shortening the pressure probe cable) via the tab "Diagnostics", button "System Length"

- OTT ecoLog 1000 modem status information added to the "Communication" tab

- The results of the last OTT ecoLog 1000 data transmission can be retrieved using another button on the "Communications" tab

- While converting downloaded data to another format, the operating software displays a progress dialog

- Data can now also be downloaded on site from the OTT ecoLog 1000 in "ZRXP V3" or "OTTML" format

- Default configurations now also support imperial units (with corresponding default settings)

- Downloaded log files are now archived (-> "Log files ..." button on the "Data" tab)

- Includes the OTT ecoLog 1000 Firmware V 1.00.5

- Further minor software optimizations and bugfixes

V 3.6.1 ... 3.6.8

- Updates to these versions only concern data collectors/transmitters from Sutron; not relevant for operating an OTT ecoLog 1000 or OTT internal versions; not published

V 3.5.17 (2020-02-13)

- Enables the creation of an additional measuring channel and the input of a unique identifier for stations and measuring channels; see Firmware v. 1.00.4

V 3.5.13 ... 3.5.16

- Updates to these versions only concern data collectors/transmitters from Sutron; not relevant for operating an OTT ecoLog 1000

V 3.5.12 (2019-08-13)

- Initial version for OTT ecoLog 1000

  (until V 3.5.11 -> versions only for data loggers/transmitters from Sutron)